Alloys & Special Metals

Inconel 600

Inconel 600

Inconel Alloy 600, UNS N06600, ASTM B166 Suppliers, AMS 5540

Inconel Alloy 600 is a standard material for applications which oblige imperviousness to consumption and warmth. The composite likewise has fantastic mechanical properties and presents the attractive blend of high quality and great workability.

The high nickel content gives the combination imperviousness to erosion by numerous natural what more, inorganic mixes and furthermore makes it essentially invulnerable to chloride-particle push erosion breaking.

Chromium gives imperviousness to sulphur mixes and additionally gives imperviousness to oxidizing conditions at high temperatures or in destructive arrangements. The amalgam is most certainly not precipitation hardenable; it is solidified and reinforced just by icy work.

The flexibility of INCONEL composite 600 has prompted to its utilization in an assortment of uses including temperatures from cryogenic to over 2000°F (1095°C).

The combination is utilized widely in the concoction industry for its quality and consumption resistance. Applications incorporate warmers, stills, bubble towers and condensers for preparing of unsaturated fats; evaporator tubes, tube sheets and chipping plate for the produce of sodium sulphide; and hardware for taking care of abietic corrosive in the produce of paper mash.

The combination’s quality and oxidation resistance at high temperatures make it valuable for some applications in the warm treating industry. It is utilized for answers, stifles, roller hearths and other heater segments and for warm treating wicker container and plate.

In the aeronautical field, INCONEL combination 600 is utilized for an assortment of motor and airframe parts which must withstand high temperatures. Cases are lockwire, debilitate liners and turbine seals.

INCONEL compound 600 is utilized as a part of the electronic field for such parts as cathode-beam tube arachnids, thyratron networks, tube bolster individuals and springs. The composite is a standard material of development for atomic reactors. It has incredible imperviousness to consumption by high-virtue water, and no sign of chloride-particle stretch consumption splitting in reactor water frameworks has been recognized. For atomic applications, the combination is delivered to demanding determinations and is assigned INCONEL composite 600T.

Inconel 600 review has a place with Nickel Based Super Alloy. Inconel 600 is connected where enterprises require an extraordinary oxidation resistance and consumption. It is utilised for different purposes in the warmth treating industry.

Inconel 600 has got awesome qualities like imperviousness to destructive condition, brilliant mechanical properties, non-attractive, high quality and great weld capacity.

It additionally gives imperviousness to natural and inorganic mixes, soluble arrangements and chloride particle stretch consumption breaking.

Aside from Heat Treat Industries, this nickel composite is utilised as a part of Furnace Industries, Pulp and Paper, Nuclear Industries, Aerospace and Chemical Industries.

Gulf Oil & Gas International is the main provider and exporters of Incoloy 600 Plate, Sheet, Round bar, Pipe, Tube, Wire, Elbow, Fasteners, Filler Wire, Foil, Flanges, Pipe Fittings, Flat bar, Forging and Bolts.

Inconel 600 Chemical Composition

Ni + Co Cr Fe C Mn S Si Cu
72.0 min 14.0-17.0 6.0-10.0 .15 max 1.00 max .015 max .50 max .50 max

Inconel Alloy 600, UNS N06600, ASTM B166, AMS 5540 Mechanical Properties

Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB)
Rod & Bar Cold-Drawn 80-100 25-50 35-55 65-85
Rod & Bar Hot-Finished 80-100 30-50 35-55 65-85
Tube & Pipe Hot-Finished 75-100 25-50 35*55
Tube & Pipe Cold-Drawn 80-100 25-50 35-55 88 Max
Plate Hot-Rolled 80-105 30-50 35-55 65-85
Sheet Cold-Drawn 80-100 30-45 35-55 88 Max

INCONEL compound 600, contingent upon frame and condition. In the strengthened condition, the compound displays direct yield qualities of 25,000 to 50,000 psi (172 to 345 Mpa). Yield qualities in that range, consolidated with lengthenings of 55 to 35%, allow the amalgam to be created with little trouble. Vigorously cold worked material, be that as it may, can have rigid qualities as high as 220,000 psi (1517 Mpa).

Values for properties announced in this production are ordinary however are not reasonable for determination purposes unless expressed as least or greatest.

Incoloy 600 temperature runs between 1600° to 2250°F (870° to 1230°C). Light work should be possible at 1600°F (870°C) and overwhelming work range ought to be in the middle of 1900° and 2250°F (1040° and 1230°C). In the tempered condition, this combination performs adjusted yield quality of 25,000 to 50,000 psi (172 to 345 Mpa). Yield quality with extensions of 55% to 35%, Inconel 600 can be manufactured effectively.

Disclaimer Trademarks:

All trademarks used in these documents are the trademarks or service marks of their respective owners. Names are listed solely for reference to help identify products consistent with listed specifications Specifically. Nickel 200/201, Monel, Inconel and Incoloy are registered trademarks of Inco Alloys/Special Metals. Hastelloy is a registered trademark of Haynes International. Gulf Oil & Gas International FZE is not affiliated with any manufacturers. The data herein is for information only. It is not intended for design or engineering purposes. All information is deemed to be correct, and any error or omission is regretted.

Send Enquiry